10A CANopen Servo Drive for Compact Industrial Axes

The MCAC610-23B-RC is a 10A CANopen Servo Drive for lightweight industrial axes networked over RS485 plus CANopen from a 24-60 VDC supply. Lyenwsin supplies this compact drive to distributors, integrators, and machine builders who need dependable digital motion control. The drive monitors overvoltage, undervoltage, overcurrent, position deviation, and disconnection faults, tripping the axis when a fault is detected.

Control and Adaptability

An ARM processor with a large FPGA runs the fully digital control loops. Auto-tuning and resonance frequency identification let the drive stabilize differing light loads without intensive manual gain work, easing reuse across several machines in the same plant.

CANopen Fieldbus Operation

RS485 plus CANopen provides a reliable, widely deployed factory fieldbus. Because the drive is addressable over the bus, the master can configure parameters and read live axis status, integrating the 10 A drive cleanly into an existing CANopen motion network.

Feedback and Wiring

Both incremental and absolute encoders are supported to suit different resolution and cost targets. Rich I/O terminals provide limit switch, homing reference, and probe functions, with compatibility for PLCs from Inovance, Leadshine, Omron, Delta, and Beckhoff. Fault protection trips the axis to contain electrical and positional issues.

Key Specifications

• Output current: 10 A
• Supply voltage: 24-60 VDC
• Fieldbus: RS485 + CANopen
• Control: digital position, velocity, homing, torque; auto-tuning and resonance identification
• Encoder support: incremental and absolute
• Protection: overvoltage, undervoltage, overcurrent, position deviation, disconnection

Industrial Applications

The drive fits lightweight packaging machines, medical automation, and small factory cells where a compact 10 A CANopen servo axis delivers reliable, protected motion. It is also suited to inspection equipment that already standardizes on CANopen fieldbus.

Procurement Guidance

Match the servomotor’s rated current to the 10 A output and verify the 24-60 VDC bus voltage before installation. Lyenwsin provides datasheets, I/O references, and CANopen parameter guidance to shorten commissioning. Contact our technical team for a quote and delivery information.