10A ProfiNET Servo Drive for Compact Fieldbus Axes

The MCAC610-23B-PN is a 10A ProfiNET Servo Drive for compact low-voltage axes powered from a 24-60 VDC supply. Distributed by Lyenwsin for machine builders and system integrators, this servo drive delivers fully digital position, velocity, homing, and torque control while protecting against overvoltage, undervoltage, overcurrent, position deviation, and disconnection faults. Its lower current rating makes it a space-saving choice for lighter fieldbus-controlled stations.

Small-Format Digital Control

An ARM processor with a large FPGA runs the digital control loops. Auto-tuning and resonance frequency identification let the drive settle lighter mechanical loads with minimal manual tuning, and the smaller power stage keeps the footprint appropriate for panel-constrained machines.

ProfiNET Fieldbus Operation

ProfiNET provides a standard plant-level interface for cyclic control and diagnostics. A ProfiNET master can command the 10 A axis and read back its status over the network, integrating it cleanly into a wider controller architecture without dedicated point-to-point wiring.

Feedback and Interfacing

The drive supports incremental and absolute encoders to cover differing accuracy and cost targets. Rich I/O terminals provide limit switch, homing reference, and probe functions, and the drive interoperates with PLCs from Inovance, Leadshine, Omron, Delta, and Beckhoff. Fault protection trips the axis to contain electrical and positional faults.

Key Specifications

• Output current: 10 A
• Supply voltage: 24-60 VDC
• Fieldbus: ProfiNET
• Control: digital position, velocity, homing, torque; auto-tuning and resonance identification
• Encoder support: incremental and absolute
• Protection: overvoltage, undervoltage, overcurrent, position deviation, disconnection

Typical Applications

The drive suits inspection lines, robotics, packaging automation, and light material handling where compact servo axes must index quickly and repeatably. It is a practical choice for machines with limited cabinet depth that still require ProfiNET connectivity.

Selection Considerations

Verify the servomotor’s current draw stays within 10 A and that the 24-60 VDC supply matches your cabinet architecture. Lyenwsin’s technical support can help confirm encoder compatibility and ProfiNET master settings. Request a quote to check current availability and lead times.