4.8 N·m 220V Servo Motor with 17-Bit Encoder and Brake

A High-Speed 1500 W Servo

The 130JASM515230K-17BCWH is a 4.8 N·m 220V Servo Motor that runs at 3000 r/min on a 130 mm flange, rated at 1500 W with 4.8 N·m of torque. Its 17-bit magnetic encoder supplies precise rotor-angle feedback, and an integral brake holds the shaft when power is removed.

Encoded Control at High Speed

At 3000 r/min, encoder resolution is what keeps the velocity and position loops tight. The 17-bit feedback lets the drive measure and correct error as the shaft spins, so the servo tracks rapid commands without lagging into error. This closed loop behaviour is the reason the unit suits high-cycle and rapid-traverse motions. The 17-bit encoder also reports a clean speed signal as the shaft decelerates into a stop, which helps the drive settle without hunting.

The 4.8 N·m rating is continuous; the 300% short-time overload margin covers brief acceleration torque within the thermal duty limit.

Brake and Package

The holding brake keeps the shaft fixed at standstill on stop-and-go or vertical axes. The 130 mm flange and 220 V supply make it straightforward to drop into machines standardized on 220 V.

Key Specifications

• Rated voltage: 220 VAC
• Rated power: 1500 W
• Frame size: 130 mm
• Rated torque: 4.8 N·m
• Rated speed: 3000 r/min
• Encoder: 17-bit magnetic
• Holding brake: included
• Characteristics: high rotational speed, high performance, low noise

Application Fit

This servo is used in robotics and factory automation rapid motion, CNC rapid-feed axes, packaging and food processing high-cycle drives, battery manufacturing and material handling, textile, printing, and AGV/AMR systems.

Selection Notes

For 220 V machines that need to move fast while keeping position under control, check the load inertia ratio and the drive’s speed loop bandwidth. On robots and pick-and-place cells, the low rotor inertia of this speed class helps the motion controller achieve short cycle times with less gain tuning. Lyenwsin supplies the 4.8 N·m 220V servo motor with matched drives and commissioning support.